Allenheath WZ 20S USER GUIDE Bedienungsanleitung PDF herunterladen (Seite 9)

WZ20S User Guide 9

Specifications

0dBu = 0.775 Volts rms +4dBu = 1.23V rms

0dBV = 1 Volt rms -10dBV = 316mV rms

Console Specifications

Maximum output level XLR +26dBu into >2k ohm load

TRS jack +21dBu into >2k ohm load

Internal headroom Channels +21dB

Mix to output +23dB

Peak indicators Turn on 5dB before clipping

Meters MIX 1,2 / MONITOR Peak reading 12 led 3 colour

Frequency response +0/-1dB 20Hz to 50kHz

Distortion < 0.006% THD+noise measured at +14dBu 1kHz

Crosstalk < 90dB Channel shutoff measured at 1kHz

Noise Measured rms 22Hz to 22kHz

MIC EIN -128dB referred to 150 ohm source

Residual output noise XLR -90dBu (-94dB S/N)

TRS jack -94dBu (-94dB S/N)

Mix noise, ch routed XLR -86dBu (-90dB S/N)

TRS jack -90dBu (-90dB S/N)

Power Supply

Internal switch mode power unit with auto sensing mains input.

MAINS IN socket IEC 3 pin

Power lead Country dependent with moulded mains plug supplied

AC mains 100 to 240V AC @ 50/60Hz

Consumption 35W max

Mains fuse rating 100-240V AC T500mA 20mm

Dimensions and Weights

The connector pod can be rotated and fixed in one of two positions to allow either

desktop operation with rear facing connectors, or 19” rack mounting with underside

connectors in 10U space.

Width Height Depth

Desktop 483mm (19”) 192mm (7.6”) 530mm (20.9”)

Rack mounted 483mm (19”) 444mm (17.5”) 10U 135mm (5.3”)

Packed 590mm (23.2”) 260mm (10.2”) 610mm (24”)

Unpacked Packed

Weight 10kg (22lbs) 13kg (29lbs)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 34 35

Keine Kommentare

Allenheath WZ 20S USER GUIDE Bedienungsanleitung Seite 9